BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//JF Group - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:JF Group
X-ORIGINAL-URL:https://jfpetrogroup.com
X-WR-CALDESC:Events for JF Group
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260803T080000
DTEND;TZID=America/Chicago:20260807T180000
DTSTAMP:20260718T044634
CREATED:20260114T215836Z
LAST-MODIFIED:20260114T215836Z
UID:17024-1785744000-1786125600@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Baton Rouge
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-baton-rouge-10/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260803T080000
DTEND;TZID=America/Chicago:20260807T180000
DTSTAMP:20260718T044634
CREATED:20260114T220703Z
LAST-MODIFIED:20260114T220703Z
UID:17028-1785744000-1786125600@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Raleigh
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-raleigh-19/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260718T044634
CREATED:20260114T223451Z
LAST-MODIFIED:20260114T223451Z
UID:17067-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - San Antonio
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-san-antonio-48/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260718T044634
CREATED:20260114T225202Z
LAST-MODIFIED:20260114T225202Z
UID:17069-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Des Moines
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-des-moines-6/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260904T180000
DTSTAMP:20260718T044634
CREATED:20260115T000809Z
LAST-MODIFIED:20260115T000809Z
UID:17077-1788163200-1788544800@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Dayton
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-dayton-28/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
END:VEVENT
END:VCALENDAR