BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//JF Petroleum Group - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://jfpetrogroup.com
X-WR-CALDESC:Events for JF Petroleum Group
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260504T080000
DTEND;TZID=America/Chicago:20260508T180000
DTSTAMP:20260425T111605
CREATED:20251120T202303Z
LAST-MODIFIED:20251120T202303Z
UID:16490-1777881600-1778263200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-44/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Passport-Side-NewGUI-ImpulsePIN-cropped-300x300-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260511T080000
DTEND;TZID=America/Chicago:20260515T180000
DTSTAMP:20260425T111605
CREATED:20251120T202223Z
LAST-MODIFIED:20251120T202223Z
UID:16410-1778486400-1778868000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-20/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260518T080000
DTEND;TZID=America/Chicago:20260522T180000
DTSTAMP:20260425T111605
CREATED:20251120T201454Z
LAST-MODIFIED:20260119T134423Z
UID:16472-1779091200-1779472800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Raleigh
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-raleigh-17/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260601T080000
DTEND;TZID=America/Chicago:20260605T180000
DTSTAMP:20260425T111605
CREATED:20251120T201838Z
LAST-MODIFIED:20251120T201838Z
UID:16496-1780300800-1780682400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-43/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Passport-Side-NewGUI-ImpulsePIN-cropped-300x300-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260601T080000
DTEND;TZID=America/Chicago:20260605T180000
DTSTAMP:20260425T111605
CREATED:20251229T145617Z
LAST-MODIFIED:20251229T145617Z
UID:16901-1780300800-1780682400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Rancho Cucamongo
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-rancho-cucamongo-3/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260622T080000
DTEND;TZID=America/Chicago:20260626T180000
DTSTAMP:20260425T111605
CREATED:20251120T201141Z
LAST-MODIFIED:20251120T201141Z
UID:16468-1782115200-1782496800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-19/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Passport Training
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260706T080000
DTEND;TZID=America/Chicago:20260710T180000
DTSTAMP:20260425T111605
CREATED:20260114T214828Z
LAST-MODIFIED:20260114T214828Z
UID:16991-1783324800-1783706400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-45/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260713T080000
DTEND;TZID=America/Chicago:20260717T180000
DTSTAMP:20260425T111605
CREATED:20260114T214955Z
LAST-MODIFIED:20260114T214955Z
UID:16999-1783929600-1784311200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-baton-rouge-13/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260720T080000
DTEND;TZID=America/Chicago:20260724T180000
DTSTAMP:20260425T111605
CREATED:20251229T150013Z
LAST-MODIFIED:20251229T150013Z
UID:16907-1784534400-1784916000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Rancho Cucamongo
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-rancho-cucamongo-4/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260720T080000
DTEND;TZID=America/Chicago:20260724T180000
DTSTAMP:20260425T111605
CREATED:20260114T215437Z
LAST-MODIFIED:20260114T215437Z
UID:17010-1784534400-1784916000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Des Moines
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-des-moines-3/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260803T080000
DTEND;TZID=America/Chicago:20260807T180000
DTSTAMP:20260425T111605
CREATED:20260114T215948Z
LAST-MODIFIED:20260114T215948Z
UID:17026-1785744000-1786125600@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-21/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260803T080000
DTEND;TZID=America/Chicago:20260807T180000
DTSTAMP:20260425T111605
CREATED:20260114T220517Z
LAST-MODIFIED:20260114T220517Z
UID:17030-1785744000-1786125600@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-46/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260425T111605
CREATED:20260114T222334Z
LAST-MODIFIED:20260114T222334Z
UID:17065-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Raleigh
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-raleigh-18/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260824T080000
DTEND;TZID=America/Chicago:20260828T180000
DTSTAMP:20260425T111605
CREATED:20260114T224000Z
LAST-MODIFIED:20260114T224000Z
UID:17071-1787558400-1787940000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-baton-rouge-14/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260904T180000
DTSTAMP:20260425T111605
CREATED:20251229T214340Z
LAST-MODIFIED:20251229T214340Z
UID:16923-1788163200-1788544800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Rancho Cucamonga
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-rancho-cucamonga-2/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Passport-Side-NewGUI-ImpulsePIN-cropped-300x300-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260904T180000
DTSTAMP:20260425T111605
CREATED:20260115T001811Z
LAST-MODIFIED:20260115T001811Z
UID:17081-1788163200-1788544800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-47/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260914T080000
DTEND;TZID=America/Chicago:20260918T180000
DTSTAMP:20260425T111605
CREATED:20260115T003436Z
LAST-MODIFIED:20260115T233709Z
UID:17088-1789372800-1789754400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-22/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260928T080000
DTEND;TZID=America/Chicago:20261002T180000
DTSTAMP:20260425T111605
CREATED:20260115T233911Z
LAST-MODIFIED:20260115T233911Z
UID:17101-1790582400-1790964000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Des Moines
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-des-moines-4/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261005T080000
DTEND;TZID=America/Chicago:20261009T180000
DTSTAMP:20260425T111605
CREATED:20260115T234133Z
LAST-MODIFIED:20260115T234133Z
UID:17112-1791187200-1791568800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-baton-rouge-15/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261019T080000
DTEND;TZID=America/Chicago:20261023T180000
DTSTAMP:20260425T111605
CREATED:20260115T234239Z
LAST-MODIFIED:20260115T234239Z
UID:17132-1792396800-1792778400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-48/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261026T080000
DTEND;TZID=America/Chicago:20261030T180000
DTSTAMP:20260425T111605
CREATED:20260116T000205Z
LAST-MODIFIED:20260116T000205Z
UID:17136-1793001600-1793383200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-23/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261116T080000
DTEND;TZID=America/Chicago:20261120T180000
DTSTAMP:20260425T111605
CREATED:20260116T005108Z
LAST-MODIFIED:20260119T134621Z
UID:17154-1794816000-1795197600@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Raleigh
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-raleigh-19/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261116T080000
DTEND;TZID=America/Chicago:20261120T180000
DTSTAMP:20260425T111605
CREATED:20260116T005146Z
LAST-MODIFIED:20260116T005146Z
UID:17156-1794816000-1795197600@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-49/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261130T080000
DTEND;TZID=America/Chicago:20261204T180000
DTSTAMP:20260425T111605
CREATED:20260116T005243Z
LAST-MODIFIED:20260116T005243Z
UID:17158-1796025600-1796407200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-baton-rouge-16/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261207T080000
DTEND;TZID=America/Chicago:20261211T180000
DTSTAMP:20260425T111605
CREATED:20260116T005407Z
LAST-MODIFIED:20260116T005407Z
UID:17166-1796630400-1797012000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-24/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
END:VCALENDAR