BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//JF Group - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:JF Group
X-ORIGINAL-URL:https://jfpetrogroup.com
X-WR-CALDESC:Events for JF Group
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260615T080000
DTEND;TZID=America/Chicago:20260619T180000
DTSTAMP:20260721T162542
CREATED:20251120T201224Z
LAST-MODIFIED:20260420T163952Z
UID:16504-1781510400-1781892000@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Des Moines
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nSafety\nApplause Media\nFlexPay Connect v2\nFlexPay IV\nDownloading from Extranet\nLaptop Tools & Communications\nDispenser Programming\nZ Modem Communications\nElectronic & Hydraulic Components & Troubleshooting.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-des-moines-4/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260615T080000
DTEND;TZID=America/Chicago:20260619T180000
DTSTAMP:20260721T162542
CREATED:20251120T201258Z
LAST-MODIFIED:20260318T231424Z
UID:16408-1781510400-1781892000@jfpetrogroup.com
SUMMARY:NTI Class - Baton Rouge JFPG Internal ONLY
DESCRIPTION:Class Length \n5 Days – 8am – 6 pm \nPre-Requisites: \n\nNTI online pre course thru company internal LMS. Will be set up upon registration\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nDay 1 \n\nMeet and greet. (30 minutes)\nCustomer Relations. (30 minutes)\n\n\nSafety. (1 hour)\nTools of the trade. (30 minutes)\nTanks. (30 minutes)\nIntro to Fuel Delivery Systems (1 hours)\nLunch. (1 hour)\n\n\nComplete intro to Fuel Delivery Systems. (1 hour)\nTanks. (30 minutes)\nEnvironmental considerations. (1 hour)\nIntro to ATG’s. (1.5 hours)\n\n  \nDay 2 \n\nReview of previous day. (30 minutes)\nIntro to Fuel Delivery Systems Electrical requirements. Basic Electrical. (2 hours)\nHands on Electrical. (1.5 hours)\nLunch. (1 hour)\n\n\nComplete hands on electrical.\nLaptop skills and programs. (3 hours)\n\n  \nDay 3 \n\nIntro to GVR Pumps and Dispensers. (3 hours)\n\n\nIntro to electronic fuel control. (1 hour)\nLunch. (1 hour)\nDispensing hydraulics. (1 hour)\nDispensing Service. (3 hours)\n\n  \nDay 4 \n\nDispensing service. (4 hours)\nBasic Networking. (4 hours)\n\n  \nDay 5 \n\nEnvironmental Testing. (3-4 hours)\nFinal test.
URL:https://jfpetrogroup.com/course/nti-class-baton-rouge-jfpg-internal-only/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:NTI
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260615T080000
DTEND;TZID=America/Chicago:20260619T180000
DTSTAMP:20260721T162542
CREATED:20260526T161346Z
LAST-MODIFIED:20260526T164545Z
UID:19255-1781510400-1781892000@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – Raleigh
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-raleigh-14/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260619T080000
DTEND;TZID=America/Chicago:20260619T170000
DTSTAMP:20260721T162542
CREATED:20260113T165145Z
LAST-MODIFIED:20260113T165145Z
UID:17051-1781856000-1781888400@jfpetrogroup.com
SUMMARY:ISD - Rancho Cucamonga
DESCRIPTION:Class Length \n1 Days: 8am – 5pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID\nVeeder Root ATG\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nA physical network port (RJ45) or USB to Ethernet adapter.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nISD Setup Tool and TLS communication.\nContainment monitoring and control.\nStage II vapor collection monitoring and troubleshooting.\n\n 
URL:https://jfpetrogroup.com/course/isd-rancho-cucamonga-4/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:ISD
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260622T080000
DTEND;TZID=America/Chicago:20260622T180000
DTSTAMP:20260721T162542
CREATED:20260602T192119Z
LAST-MODIFIED:20260602T192119Z
UID:19327-1782115200-1782151200@jfpetrogroup.com
SUMMARY:Smith Driving Course - Houston JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-houston-jf-internal-only/
LOCATION:Houston\, 2700 Aldine Bender Houston\, TX 77032\, Houston\, TX\, 77032\, United States
CATEGORIES:Smith Driving
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260622T080000
DTEND;TZID=America/Chicago:20260626T180000
DTSTAMP:20260721T162542
CREATED:20260209T025200Z
LAST-MODIFIED:20260224T202453Z
UID:16500-1782115200-1782496800@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – San Antonio
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-san-antonio-52/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260623T080000
DTEND;TZID=America/Chicago:20260623T180000
DTSTAMP:20260721T162542
CREATED:20260601T145753Z
LAST-MODIFIED:20260601T145753Z
UID:19304-1782201600-1782237600@jfpetrogroup.com
SUMMARY:FlexPay 6 - Dayton
DESCRIPTION:1 – Day Class \nThis course trains technicians to install\,\nprogram\, and troubleshoot the FlexPay™ 6 for Gilbarco Veeder-Root™\nEncore® dispensers and Passport® POS systems. Participants\nwill learn communication configuration\, installation\nprocedures\, start-up and programming\, and troubleshooting\nthrough interactive modules featuring videos and practical\nexercises \nPrerequisites: \n• API Safety or POST Safety Certification (Status = Acquired)\n• GVR Dispensing Systems – Canada or GVR Dispensing Systems – US\n• Insite360 Encore Remote Management
URL:https://jfpetrogroup.com/course/flexpay-6-dayton-10/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:FlexPay 6
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260623T080000
DTEND;TZID=America/Chicago:20260623T180000
DTSTAMP:20260721T162542
CREATED:20260602T192510Z
LAST-MODIFIED:20260602T192510Z
UID:19331-1782201600-1782237600@jfpetrogroup.com
SUMMARY:Smith Driving Course - Houston JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-houston-jf-internal-only-2/
LOCATION:Houston\, 2700 Aldine Bender Houston\, TX 77032\, Houston\, TX\, 77032\, United States
CATEGORIES:Smith Driving
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260623T080000
DTEND;TZID=America/Chicago:20260623T180000
DTSTAMP:20260721T162542
CREATED:20260608T193908Z
LAST-MODIFIED:20260619T112758Z
UID:19388-1782201600-1782237600@jfpetrogroup.com
SUMMARY:Smith Driving Course - Raleigh JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-houston-jf-internal-only-2-3/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Smith Driving
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260624T080000
DTEND;TZID=America/Chicago:20260624T180000
DTSTAMP:20260721T162542
CREATED:20260601T145918Z
LAST-MODIFIED:20260601T145918Z
UID:19307-1782288000-1782324000@jfpetrogroup.com
SUMMARY:FlexPay 6 - Dayton
DESCRIPTION:1 – Day Class \nThis course trains technicians to install\,\nprogram\, and troubleshoot the FlexPay™ 6 for Gilbarco Veeder-Root™\nEncore® dispensers and Passport® POS systems. Participants\nwill learn communication configuration\, installation\nprocedures\, start-up and programming\, and troubleshooting\nthrough interactive modules featuring videos and practical\nexercises \nPrerequisites: \n• API Safety or POST Safety Certification (Status = Acquired)\n• GVR Dispensing Systems – Canada or GVR Dispensing Systems – US\n• Insite360 Encore Remote Management
URL:https://jfpetrogroup.com/course/flexpay-6-dayton-11/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:FlexPay 6
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260624T080000
DTEND;TZID=America/Chicago:20260624T180000
DTSTAMP:20260721T162542
CREATED:20260602T192653Z
LAST-MODIFIED:20260602T192653Z
UID:19334-1782288000-1782324000@jfpetrogroup.com
SUMMARY:Smith Driving Course - Houston JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-houston-jf-internal-only-2-2/
LOCATION:Houston\, 2700 Aldine Bender Houston\, TX 77032\, Houston\, TX\, 77032\, United States
CATEGORIES:Smith Driving
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260624T080000
DTEND;TZID=America/Chicago:20260624T180000
DTSTAMP:20260721T162542
CREATED:20260608T194246Z
LAST-MODIFIED:20260619T112915Z
UID:19391-1782288000-1782324000@jfpetrogroup.com
SUMMARY:Smith Driving Course -Raleigh JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-houston-jf-internal-only-2-3-2/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Smith Driving
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260625T080000
DTEND;TZID=America/Chicago:20260625T180000
DTSTAMP:20260721T162542
CREATED:20260608T194432Z
LAST-MODIFIED:20260619T113007Z
UID:19394-1782374400-1782410400@jfpetrogroup.com
SUMMARY:Smith Driving Course -Raleigh JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-houston-jf-internal-only-2-3-2-2/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Smith Driving
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260630T080000
DTEND;TZID=America/Chicago:20260702T180000
DTSTAMP:20260721T162542
CREATED:20260421T182734Z
LAST-MODIFIED:20260421T182734Z
UID:18830-1782806400-1783015200@jfpetrogroup.com
SUMMARY:OPW Fuel Control Training - Baton Rouge (Internal ONLY)
DESCRIPTION:3-Day Class \nKosner Janvier from Dover will be teaching the class. \n  \nTo make sure the techs are prepared for the OPW Fuel Control class\, they will need to complete the following: \n-Register on the DFS training LMS. I have attached a PDF and a Youtube video link with instructions of how to register. \nYoutube Link – Dover Fueling Solutions Product Training User and Class Registration – YouTube \nDFS Training Website  – https://producttraining.doverfuelingsolutions.com/momentum/ \n-Complete online OPW Fuel Control pre-coarse prior to registering for the instructor led training. \n2886 – FMS Fuel Control FSC3000 Synergy Pre-Class Coursework 1501 \n-Register for instructor led course OPW Fuel Control 1502. \n480 – OPW FMS Fuel Site Controller FSC3000/Synergy 3 Day ILT 1502
URL:https://jfpetrogroup.com/course/opw-fuel-control-training-baton-rouge-internal-only/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:OPW Fuel Control
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260706T080000
DTEND;TZID=America/Chicago:20260709T180000
DTSTAMP:20260721T162542
CREATED:20260113T172944Z
LAST-MODIFIED:20260113T172944Z
UID:16993-1783324800-1783620000@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Des Moines
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-des-moines-7/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260706T080000
DTEND;TZID=America/Chicago:20260710T180000
DTSTAMP:20260721T162542
CREATED:20251229T145935Z
LAST-MODIFIED:20251229T145935Z
UID:16905-1783324800-1783706400@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Rancho Cucamongo
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-rancho-cucamongo-4/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Encore_700_S_highres-300x300-1-e1767890948263.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260706T080000
DTEND;TZID=America/Chicago:20260710T180000
DTSTAMP:20260721T162542
CREATED:20260114T214828Z
LAST-MODIFIED:20260114T214828Z
UID:16991-1783324800-1783706400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-45/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260706T080000
DTEND;TZID=America/Chicago:20260710T180000
DTSTAMP:20260721T162542
CREATED:20260209T025004Z
LAST-MODIFIED:20260224T202548Z
UID:16987-1783324800-1783706400@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – Baton Rouge
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-baton-rouge-12/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260706T080000
DTEND;TZID=America/Chicago:20260710T180000
DTSTAMP:20260721T162542
CREATED:20260512T151541Z
LAST-MODIFIED:20260513T151921Z
UID:19074-1783324800-1783706400@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – Dayton
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-dayton-3/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260713T080000
DTEND;TZID=America/Chicago:20260717T180000
DTSTAMP:20260721T162542
CREATED:20260114T214955Z
LAST-MODIFIED:20260114T214955Z
UID:16999-1783929600-1784311200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-baton-rouge-13/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260713T080000
DTEND;TZID=America/Chicago:20260717T180000
DTSTAMP:20260721T162542
CREATED:20260114T215100Z
LAST-MODIFIED:20260114T215100Z
UID:17006-1783929600-1784311200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - San Antonio
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-san-antonio-47/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260713T080000
DTEND;TZID=America/Chicago:20260717T180000
DTSTAMP:20260721T162542
CREATED:20260318T232717Z
LAST-MODIFIED:20260318T232717Z
UID:18400-1783929600-1784311200@jfpetrogroup.com
SUMMARY:CSTS - Dayton JFPG Internal Only
DESCRIPTION:Class Length: \n5 Days – 8am – 6pm \nPre-Requisites: \n\nCSTS online pre course thru company internal LMS.\n\nSkills Acquired: \n\nSmith Driving Certification\nInitial Company Safety Program\nConfined Space Entry\nTrailer Safety Course
URL:https://jfpetrogroup.com/course/csts-dayton-jfpg-internal-only/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:CSTS
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Julio Delgado":MAILTO:julio.delgado@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260720T080000
DTEND;TZID=America/Chicago:20260720T180000
DTSTAMP:20260721T162542
CREATED:20260625T150541Z
LAST-MODIFIED:20260625T150541Z
UID:19577-1784534400-1784570400@jfpetrogroup.com
SUMMARY:Smith Driving Course -Raleigh JF Internal ONLY
DESCRIPTION:Smith Driving will go over the five keys as well as hands-on driving
URL:https://jfpetrogroup.com/course/smith-driving-course-raleigh-jf-internal-only/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Smith Driving
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260720T080000
DTEND;TZID=America/Chicago:20260724T180000
DTSTAMP:20260721T162542
CREATED:20251229T150013Z
LAST-MODIFIED:20251229T150013Z
UID:16907-1784534400-1784916000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Rancho Cucamongo
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-rancho-cucamongo-4/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260720T080000
DTEND;TZID=America/Chicago:20260724T180000
DTSTAMP:20260721T162542
CREATED:20260114T215437Z
LAST-MODIFIED:20260114T215437Z
UID:17010-1784534400-1784916000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Des Moines
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-des-moines-3/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260720T080000
DTEND;TZID=America/Chicago:20260724T180000
DTSTAMP:20260721T162542
CREATED:20260319T174232Z
LAST-MODIFIED:20260504T184045Z
UID:18431-1784534400-1784916000@jfpetrogroup.com
SUMMARY:NTI Class - Dayton JFPG Internal ONLY
DESCRIPTION:Class Length \n5 Days – 8am – 6 pm \nPre-Requisites: \n\nNTI online pre course thru company internal LMS. Will be set up upon registration\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nDay 1 \n\nMeet and greet. (30 minutes)\nCustomer Relations. (30 minutes)\n\n\nSafety. (1 hour)\nTools of the trade. (30 minutes)\nTanks. (30 minutes)\nIntro to Fuel Delivery Systems (1 hours)\nLunch. (1 hour)\n\n\nComplete intro to Fuel Delivery Systems. (1 hour)\nTanks. (30 minutes)\nEnvironmental considerations. (1 hour)\nIntro to ATG’s. (1.5 hours)\n\n  \nDay 2 \n\nReview of previous day. (30 minutes)\nIntro to Fuel Delivery Systems Electrical requirements. Basic Electrical. (2 hours)\nHands on Electrical. (1.5 hours)\nLunch. (1 hour)\n\n\nComplete hands on electrical.\nLaptop skills and programs. (3 hours)\n\n  \nDay 3 \n\nIntro to GVR Pumps and Dispensers. (3 hours)\n\n\nIntro to electronic fuel control. (1 hour)\nLunch. (1 hour)\nDispensing hydraulics. (1 hour)\nDispensing Service. (3 hours)\n\n  \nDay 4 \n\nDispensing service. (4 hours)\nBasic Networking. (4 hours)\n\n  \nDay 5 \n\nEnvironmental Testing. (3-4 hours)\nFinal test.
URL:https://jfpetrogroup.com/course/nti-class-dayton-jfpg-internal-only-3/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:NTI
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Julio Delgado":MAILTO:julio.delgado@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260721T080000
DTEND;TZID=America/Chicago:20260724T180000
DTSTAMP:20260721T162542
CREATED:20260114T215228Z
LAST-MODIFIED:20260119T160447Z
UID:17008-1784620800-1784916000@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Raleigh
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class. \n 
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-raleigh-20/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260727T080000
DTEND;TZID=America/Chicago:20260730T180000
DTSTAMP:20260721T162542
CREATED:20260114T215558Z
LAST-MODIFIED:20260114T215558Z
UID:17014-1785139200-1785434400@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class. \n 
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-baton-rouge-13/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260727T080000
DTEND;TZID=America/Chicago:20260731T180000
DTSTAMP:20260721T162542
CREATED:20260114T215701Z
LAST-MODIFIED:20260114T215701Z
UID:17012-1785139200-1785520800@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Dayton
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-dayton-27/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260727T080000
DTEND;TZID=America/Chicago:20260731T180000
DTSTAMP:20260721T162542
CREATED:20260209T024916Z
LAST-MODIFIED:20260224T202612Z
UID:17018-1785139200-1785520800@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – San Antonio
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-san-antonio-51/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
END:VEVENT
END:VCALENDAR