BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//JF Petroleum Group - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://jfpetrogroup.com
X-WR-CALDESC:Events for JF Petroleum Group
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260803T080000
DTEND;TZID=America/Chicago:20260807T180000
DTSTAMP:20260404T103014
CREATED:20260114T220517Z
LAST-MODIFIED:20260114T220517Z
UID:17030-1785744000-1786125600@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-46/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260803T080000
DTEND;TZID=America/Chicago:20260807T180000
DTSTAMP:20260404T103014
CREATED:20260114T220703Z
LAST-MODIFIED:20260114T220703Z
UID:17028-1785744000-1786125600@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Raleigh
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-raleigh-19/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260807T080000
DTEND;TZID=America/Chicago:20260807T170000
DTSTAMP:20260404T103014
CREATED:20260113T165221Z
LAST-MODIFIED:20260113T165221Z
UID:17053-1786089600-1786122000@jfpetrogroup.com
SUMMARY:ISD - Rancho Cucamonga
DESCRIPTION:Class Length \n1 Days: 8am – 5pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID\nVeeder Root ATG\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nA physical network port (RJ45) or USB to Ethernet adapter.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nISD Setup Tool and TLS communication.\nContainment monitoring and control.\nStage II vapor collection monitoring and troubleshooting.\n\n 
URL:https://jfpetrogroup.com/course/isd-rancho-cucamonga-5/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:ISD
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260810T080000
DTEND;TZID=America/Chicago:20260814T180000
DTSTAMP:20260404T103014
CREATED:20260318T233129Z
LAST-MODIFIED:20260318T233536Z
UID:18402-1786348800-1786730400@jfpetrogroup.com
SUMMARY:CSTS - Atlanta JFPG Internal Only
DESCRIPTION:Class Length: \n5 Days – 8am – 6pm \nPre-Requisites: \n\nCSTS online pre course thru company internal LMS.\n\nSkills Acquired: \n\nSmith Driving Certification\nInitial Company Safety Program\nConfined Space Entry\nTrailer Safety Course
URL:https://jfpetrogroup.com/course/csts-atlanta-jfpg-internal-only/
LOCATION:Atlanta\, GA\, 4070 Buford Highway Suite 7\, Duluth\, GA\, 30096\, United States
CATEGORIES:CSTS
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260811T080000
DTEND;TZID=America/Chicago:20260813T180000
DTSTAMP:20260404T103014
CREATED:20260114T221055Z
LAST-MODIFIED:20260114T221055Z
UID:17061-1786435200-1786644000@jfpetrogroup.com
SUMMARY:Gasboy Islander Prime Certification - Baton Rouge
DESCRIPTION:Class Length:\n3 Days: 8am-6pm \nOverview\nThis course covers the Gasboy Islander Prime system. The training covers the installation\, an overview of the system\, software installation and updates\, and details on enhancements from previous generations. \nAssociated Certifications\n\nGasboy Islander Prime\n\nPre Requisites\nRequired \n\nGasboy Atlas Dispenser Training\nGasboy Islander Prime Pre-Course\nGasboy Atlas X\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gasboy-islander-prime-certification-baton-rouge-16/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Gasboy Prime
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260820T180000
DTSTAMP:20260404T103014
CREATED:20260114T221649Z
LAST-MODIFIED:20260114T221649Z
UID:17063-1786953600-1787248800@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Dayton
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class. \n 
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-dayton-25/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260404T103014
CREATED:20251229T214123Z
LAST-MODIFIED:20251229T214123Z
UID:16919-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Rancho Cucamonga
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-rancho-cucamonga-3/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Encore_700_S_highres-300x300-1-e1767890948263.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260404T103014
CREATED:20260114T222334Z
LAST-MODIFIED:20260114T222334Z
UID:17065-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Raleigh
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-raleigh-18/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260404T103014
CREATED:20260114T223451Z
LAST-MODIFIED:20260114T223451Z
UID:17067-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - San Antonio
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-san-antonio-48/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260404T103014
CREATED:20260114T225202Z
LAST-MODIFIED:20260114T225202Z
UID:17069-1786953600-1787335200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Des Moines
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-des-moines-6/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260817T080000
DTEND;TZID=America/Chicago:20260821T180000
DTSTAMP:20260404T103014
CREATED:20260319T174517Z
LAST-MODIFIED:20260319T174517Z
UID:18433-1786953600-1787335200@jfpetrogroup.com
SUMMARY:NTI Class - Atlanta JFPG Internal ONLY
DESCRIPTION:Class Length \n5 Days – 8am – 6 pm \nPre-Requisites: \n\nNTI online pre course thru company internal LMS. Will be set up upon registration\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nDay 1 \n\nMeet and greet. (30 minutes)\nCustomer Relations. (30 minutes)\n\n\nSafety. (1 hour)\nTools of the trade. (30 minutes)\nTanks. (30 minutes)\nIntro to Fuel Delivery Systems (1 hours)\nLunch. (1 hour)\n\n\nComplete intro to Fuel Delivery Systems. (1 hour)\nTanks. (30 minutes)\nEnvironmental considerations. (1 hour)\nIntro to ATG’s. (1.5 hours)\n\n  \nDay 2 \n\nReview of previous day. (30 minutes)\nIntro to Fuel Delivery Systems Electrical requirements. Basic Electrical. (2 hours)\nHands on Electrical. (1.5 hours)\nLunch. (1 hour)\n\n\nComplete hands on electrical.\nLaptop skills and programs. (3 hours)\n\n  \nDay 3 \n\nIntro to GVR Pumps and Dispensers. (3 hours)\n\n\nIntro to electronic fuel control. (1 hour)\nLunch. (1 hour)\nDispensing hydraulics. (1 hour)\nDispensing Service. (3 hours)\n\n  \nDay 4 \n\nDispensing service. (4 hours)\nBasic Networking. (4 hours)\n\n  \nDay 5 \n\nEnvironmental Testing. (3-4 hours)\nFinal test.
URL:https://jfpetrogroup.com/course/nti-class-atlanta-jfpg-internal-only-3/
LOCATION:Atlanta\, GA\, 4070 Buford Highway Suite 7\, Duluth\, GA\, 30096\, United States
CATEGORIES:NTI
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260824T080000
DTEND;TZID=America/Chicago:20260827T180000
DTSTAMP:20260404T103014
CREATED:20260209T024805Z
LAST-MODIFIED:20260209T024805Z
UID:17073-1787558400-1787853600@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – San Antonio
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-san-antonio-50/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260824T080000
DTEND;TZID=America/Chicago:20260828T180000
DTSTAMP:20260404T103014
CREATED:20260114T224000Z
LAST-MODIFIED:20260114T224000Z
UID:17071-1787558400-1787940000@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-baton-rouge-14/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260824T080000
DTEND;TZID=America/Chicago:20260828T180000
DTSTAMP:20260404T103014
CREATED:20260116T000955Z
LAST-MODIFIED:20260116T000955Z
UID:17206-1787558400-1787940000@jfpetrogroup.com
SUMMARY:Truck Stop Training - Atlanta Internal Only
DESCRIPTION:5-Day Class \nInternal JFPG Truck Stop Training
URL:https://jfpetrogroup.com/course/truck-stop-training-atlanta-internal-only-17/
LOCATION:Atlanta\, GA\, 4070 Buford Highway Suite 7\, Duluth\, GA\, 30096\, United States
CATEGORIES:Truck Stop Training
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260903T180000
DTSTAMP:20260404T103014
CREATED:20260114T224606Z
LAST-MODIFIED:20260114T224606Z
UID:17075-1788163200-1788458400@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class. \n 
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-baton-rouge-14/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260903T180000
DTSTAMP:20260404T103014
CREATED:20260114T230733Z
LAST-MODIFIED:20260114T230733Z
UID:17083-1788163200-1788458400@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Des Moines
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class. \n 
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-des-moines-8/
LOCATION:Des Moines\, IA\, 5527 NE 22nd Street\, Des Moines\, IA\, 50313\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260904T180000
DTSTAMP:20260404T103014
CREATED:20251229T214340Z
LAST-MODIFIED:20251229T214340Z
UID:16923-1788163200-1788544800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Rancho Cucamonga
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-rancho-cucamonga-2/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Passport-Side-NewGUI-ImpulsePIN-cropped-300x300-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260904T180000
DTSTAMP:20260404T103014
CREATED:20260115T000809Z
LAST-MODIFIED:20260115T000809Z
UID:17077-1788163200-1788544800@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Dayton
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-dayton-28/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260831T080000
DTEND;TZID=America/Chicago:20260904T180000
DTSTAMP:20260404T103014
CREATED:20260115T001811Z
LAST-MODIFIED:20260115T001811Z
UID:17081-1788163200-1788544800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-47/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260908T080000
DTEND;TZID=America/Chicago:20260910T180000
DTSTAMP:20260404T103014
CREATED:20260115T002757Z
LAST-MODIFIED:20260115T002757Z
UID:17094-1788854400-1789063200@jfpetrogroup.com
SUMMARY:Gasboy Islander Prime Certification - Dayton
DESCRIPTION:Class Length:\n3 Days: 8am-6pm \nOverview\nThis course covers the Gasboy Islander Prime system. The training covers the installation\, an overview of the system\, software installation and updates\, and details on enhancements from previous generations. \nAssociated Certifications\n\nGasboy Islander Prime\n\nPre Requisites\nRequired \n\nGasboy Atlas Dispenser Training\nGasboy Atlas X\nGasboy Islander Prime Pre-Course\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gasboy-islander-prime-certification-dayton-5/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Gasboy Prime
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260914T080000
DTEND;TZID=America/Chicago:20260917T180000
DTSTAMP:20260404T103014
CREATED:20251229T214703Z
LAST-MODIFIED:20251229T214703Z
UID:16926-1789372800-1789668000@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Rancho Cucamonga
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuch \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-rancho-cucamonga-3/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260914T080000
DTEND;TZID=America/Chicago:20260918T180000
DTSTAMP:20260404T103014
CREATED:20260115T003436Z
LAST-MODIFIED:20260115T233709Z
UID:17088-1789372800-1789754400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-22/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260914T080000
DTEND;TZID=America/Chicago:20260918T180000
DTSTAMP:20260404T103014
CREATED:20260115T003917Z
LAST-MODIFIED:20260115T003917Z
UID:17090-1789372800-1789754400@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Raleigh
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-raleigh-20/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="David Blades":MAILTO:david.blades@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260914T080000
DTEND;TZID=America/Chicago:20260918T180000
DTSTAMP:20260404T103014
CREATED:20260209T024720Z
LAST-MODIFIED:20260209T024720Z
UID:17086-1789372800-1789754400@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – Baton Rouge
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-baton-rouge-11/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260914T080000
DTEND;TZID=America/Chicago:20260918T180000
DTSTAMP:20260404T103014
CREATED:20260318T233405Z
LAST-MODIFIED:20260318T234218Z
UID:18404-1789372800-1789754400@jfpetrogroup.com
SUMMARY:CSTS - San Antonio JFPG Internal Only
DESCRIPTION:Class Length: \n5 Days – 8am – 6pm \nPre-Requisites: \n\nCSTS online pre course thru company internal LMS.\n\nSkills Acquired: \n\nSmith Driving Certification\nInitial Company Safety Program\nConfined Space Entry\nTrailer Safety Course
URL:https://jfpetrogroup.com/course/csts-atlanta-jfpg-internal-only-2/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:CSTS
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Julio Delgado":MAILTO:julio.delgado@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260918T080000
DTEND;TZID=America/Chicago:20260918T170000
DTSTAMP:20260404T103014
CREATED:20260113T165255Z
LAST-MODIFIED:20260113T165255Z
UID:17055-1789718400-1789750800@jfpetrogroup.com
SUMMARY:ISD - Rancho Cucamonga
DESCRIPTION:Class Length \n1 Days: 8am – 5pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID\nVeeder Root ATG\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nA physical network port (RJ45) or USB to Ethernet adapter.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nISD Setup Tool and TLS communication.\nContainment monitoring and control.\nStage II vapor collection monitoring and troubleshooting.\n\n 
URL:https://jfpetrogroup.com/course/isd-rancho-cucamonga-6/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:ISD
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260921T080000
DTEND;TZID=America/Chicago:20260925T180000
DTSTAMP:20260404T103014
CREATED:20260115T004146Z
LAST-MODIFIED:20260115T004146Z
UID:17092-1789977600-1790359200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Baton Rouge
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-baton-rouge-11/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260921T080000
DTEND;TZID=America/Chicago:20260925T180000
DTSTAMP:20260404T103014
CREATED:20260209T024610Z
LAST-MODIFIED:20260209T024610Z
UID:17096-1789977600-1790359200@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – Raleigh
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander\n\nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-raleigh-12/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260921T080000
DTEND;TZID=America/Chicago:20260925T180000
DTSTAMP:20260404T103014
CREATED:20260319T174725Z
LAST-MODIFIED:20260319T174725Z
UID:18435-1789977600-1790359200@jfpetrogroup.com
SUMMARY:NTI Class - San Antonio JFPG Internal ONLY
DESCRIPTION:Class Length \n5 Days – 8am – 6 pm \nPre-Requisites: \n\nNTI online pre course thru company internal LMS. Will be set up upon registration\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nDay 1 \n\nMeet and greet. (30 minutes)\nCustomer Relations. (30 minutes)\n\n\nSafety. (1 hour)\nTools of the trade. (30 minutes)\nTanks. (30 minutes)\nIntro to Fuel Delivery Systems (1 hours)\nLunch. (1 hour)\n\n\nComplete intro to Fuel Delivery Systems. (1 hour)\nTanks. (30 minutes)\nEnvironmental considerations. (1 hour)\nIntro to ATG’s. (1.5 hours)\n\n  \nDay 2 \n\nReview of previous day. (30 minutes)\nIntro to Fuel Delivery Systems Electrical requirements. Basic Electrical. (2 hours)\nHands on Electrical. (1.5 hours)\nLunch. (1 hour)\n\n\nComplete hands on electrical.\nLaptop skills and programs. (3 hours)\n\n  \nDay 3 \n\nIntro to GVR Pumps and Dispensers. (3 hours)\n\n\nIntro to electronic fuel control. (1 hour)\nLunch. (1 hour)\nDispensing hydraulics. (1 hour)\nDispensing Service. (3 hours)\n\n  \nDay 4 \n\nDispensing service. (4 hours)\nBasic Networking. (4 hours)\n\n  \nDay 5 \n\nEnvironmental Testing. (3-4 hours)\nFinal test.
URL:https://jfpetrogroup.com/course/nti-class-san-antonio-jfpg-internal-only-2/
LOCATION:San Antonio\, TX\, 14833 Bulverde Road\, San Antonio\, TX\, 78247\, United States
CATEGORIES:NTI
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Julio Delgado":MAILTO:julio.delgado@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260928T080000
DTEND;TZID=America/Chicago:20261002T180000
DTSTAMP:20260404T103014
CREATED:20251229T214957Z
LAST-MODIFIED:20251229T214957Z
UID:16928-1790582400-1790964000@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Rancho Cucamonga
DESCRIPTION:Class Length  \n5 Days: 8am – 6pm  \nPre-Requisites:  \n\nOnline Gilbarco API Certification Course Class ID: 00003196 \n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE  \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better. \n\n\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register. \n\nMaterial Required:  \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port. \n\n\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person) \n\n\nLock-Out/Tag-Out Kit \n\n\nNote taking supplies (notebook\, pen\, pencils\, etc.) \n\nSkills Acquired:  \n\nSafety \n\n\nApplause Media \n\n\nFlexPay Connect v2 \n\n\nFlexPay IV \n\n\nDownloading from Extranet \n\n\nLaptop Tools & Communications \n\n\nDispenser Programming \n\n\nZ Modem Communications \n\n\nElectronic & Hydraulic Components & Troubleshooting. \n\nNote:  \nGVR has allowed us to add FP 6 to our current Dispensing course offering. This allows you to not have to send your technician back to a separate course for FP 6. The Dispensing systems pre courses must be completed 10 days prior to the course start date so that  we can have GVR make account adjustments.  After the account adjustments are made\, each student will be asked to add two additional pre courses. They will need to register and take I360 Encore and the FP6 pre course when instructed to do so. These must be completed before the start date for the course. enc \n  \nNOTE: \n1. All pre courses must be completed including evaluations 10 days prior to class.\n2. To be able to get a refund on class fees\, all cancelations must be sent to trainingadmin@jfpetrogroup.com 14 days prior to class.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-rancho-cucamonga-4/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
END:VEVENT
END:VCALENDAR