BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//JF Group - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://jfpetrogroup.com
X-WR-CALDESC:Events for JF Group
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240930T080000
DTEND;TZID=America/Chicago:20241004T180000
DTSTAMP:20260525T070943
CREATED:20240425T191754Z
LAST-MODIFIED:20240425T191754Z
UID:10610-1727683200-1728064800@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – San Antonio
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-san-antonio-31/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240930T080000
DTEND;TZID=America/Chicago:20241004T180000
DTSTAMP:20260525T070943
CREATED:20240529T173639Z
LAST-MODIFIED:20240529T173639Z
UID:10861-1727683200-1728064800@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Rancho Cucamonga CA
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-rancho-cucamonga-ca-3/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Passport-Side-NewGUI-ImpulsePIN-cropped-300x300-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241001T080000
DTEND;TZID=America/Chicago:20241004T180000
DTSTAMP:20260525T070943
CREATED:20240724T134652Z
LAST-MODIFIED:20240724T134652Z
UID:11953-1727769600-1728064800@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Dayton
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuchart\, Laptop Communication
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-dayton-10/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241007T080000
DTEND;TZID=America/Chicago:20241011T180000
DTSTAMP:20260525T070943
CREATED:20240418T150621Z
LAST-MODIFIED:20240418T150621Z
UID:10529-1728288000-1728669600@jfpetrogroup.com
SUMMARY:NTO- JFPG Internal Only
DESCRIPTION:Class Length: \n4.5 Days – 8am – 6pm \nPre-Requisites: \n\nNTO online pre course thru company internal LMS.\n\nSkills Acquired: \n\nSmith Driving Certification\nInitial Company Safety Program\nConfined Space Entry\nTrailer Safety Course
URL:https://jfpetrogroup.com/course/nto-jfpg-internal-only-12/
LOCATION:Atlanta\, GA\, 4070 Buford Highway Suite 7\, Duluth\, GA\, 30096\, United States
CATEGORIES:CSTS
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Julio Delgado":MAILTO:julio.delgado@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241007T080000
DTEND;TZID=America/Chicago:20241011T180000
DTSTAMP:20260525T070943
CREATED:20240426T142537Z
LAST-MODIFIED:20240426T142537Z
UID:10613-1728288000-1728669600@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-san-antonio-27/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241007T080000
DTEND;TZID=America/New_York:20241011T180000
DTSTAMP:20260525T070943
CREATED:20240529T154834Z
LAST-MODIFIED:20240801T164003Z
UID:10830-1728288000-1728669600@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – Raleigh
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-raleigh-4-2/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241007T080000
DTEND;TZID=America/Chicago:20241011T180000
DTSTAMP:20260525T070943
CREATED:20240723T144855Z
LAST-MODIFIED:20240723T144855Z
UID:11931-1728288000-1728669600@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nSafety\nApplause Media\nFlexPay Connect v2\nFlexPay IV\nDownloading from Extranet\nLaptop Tools & Communications\nDispenser Programming\nZ Modem Communications\nElectronic & Hydraulic Components & Troubleshooting.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-baton-rouge-2/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241014T080000
DTEND;TZID=America/Chicago:20241017T180000
DTSTAMP:20260525T070943
CREATED:20240529T180131Z
LAST-MODIFIED:20240529T180131Z
UID:10867-1728892800-1729188000@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Rancho Cucamonga CA
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuchart\, Laptop Communication
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-rancho-cucamonga-ca-3/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241014T080000
DTEND;TZID=America/Chicago:20241018T180000
DTSTAMP:20260525T070943
CREATED:20240418T151704Z
LAST-MODIFIED:20240418T151704Z
UID:10535-1728892800-1729274400@jfpetrogroup.com
SUMMARY:NTI Class - JFPG Internal ONLY
DESCRIPTION:Class Length \n5 Days – 8am – 6 pm \nPre-Requisites: \n\nNTI online pre course thru company internal LMS. Will be set up upon registration\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nDay 1 \n\nMeet and greet. (30 minutes)\nCustomer Relations. (30 minutes)\n\n\nSafety. (1 hour)\nTools of the trade. (30 minutes)\nTanks. (30 minutes)\nIntro to Fuel Delivery Systems (1 hours)\nLunch. (1 hour)\n\n\nComplete intro to Fuel Delivery Systems. (1 hour)\nTanks. (30 minutes)\nEnvironmental considerations. (1 hour)\nIntro to ATG’s. (1.5 hours)\n\n  \nDay 2 \n\nReview of previous day. (30 minutes)\nIntro to Fuel Delivery Systems Electrical requirements. Basic Electrical. (2 hours)\nHands on Electrical. (1.5 hours)\nLunch. (1 hour)\n\n\nComplete hands on electrical.\nLaptop skills and programs. (3 hours)\n\n  \nDay 3 \n\nIntro to GVR Pumps and Dispensers. (3 hours)\n\n\nIntro to electronic fuel control. (1 hour)\nLunch. (1 hour)\nDispensing hydraulics. (1 hour)\nDispensing Service. (3 hours)\n\n  \nDay 4 \n\nDispensing service. (4 hours)\nBasic Networking. (4 hours)\n\n  \nDay 5 \n\nEnvironmental Testing. (3-4 hours)\nFinal test.
URL:https://jfpetrogroup.com/course/nti-class-jfpg-internal-only-25/
LOCATION:Atlanta\, GA\, 4070 Buford Highway Suite 7\, Duluth\, GA\, 30096\, United States
CATEGORIES:NTI
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="Julio Delgado":MAILTO:julio.delgado@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241014T080000
DTEND;TZID=America/Chicago:20241018T180000
DTSTAMP:20260525T070943
CREATED:20240724T141517Z
LAST-MODIFIED:20240724T141517Z
UID:11978-1728892800-1729274400@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-dayton-6/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Passport-Side-NewGUI-ImpulsePIN-cropped.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241014T100000
DTEND;TZID=America/Chicago:20241016T120000
DTSTAMP:20260525T070943
CREATED:20240805T165647Z
LAST-MODIFIED:20240805T165647Z
UID:12106-1728900000-1729080000@jfpetrogroup.com
SUMMARY:Online Bennett Pump Training - INTERNAL ONLY
DESCRIPTION:Online Bennett Pump Training provided by Bennett
URL:https://jfpetrogroup.com/course/online-bennett-pump-training-internal-only-2/
LOCATION:Online Event\, United States
CATEGORIES:Bennett Pump Training
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241018T080000
DTEND;TZID=America/Chicago:20241018T170000
DTSTAMP:20260525T070943
CREATED:20240529T172038Z
LAST-MODIFIED:20240529T172038Z
UID:10854-1729238400-1729270800@jfpetrogroup.com
SUMMARY:Veeder Root ISD - Rancho Cucamonga CA
DESCRIPTION:Veeder Root ISD Course
URL:https://jfpetrogroup.com/course/veeder-root-isd-rancho-cucamonga-ca-3/
LOCATION:Rancho Cucamonga\, 9595 Lucas Ranch Rd\, Rancho Cucamonga\, CA\, 91730\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241021T080000
DTEND;TZID=America/Chicago:20241024T180000
DTSTAMP:20260525T070943
CREATED:20240723T145110Z
LAST-MODIFIED:20240723T145110Z
UID:11930-1729497600-1729792800@jfpetrogroup.com
SUMMARY:Veeder Root ATG Factory Certification - Baton Rouge
DESCRIPTION:Class Length \n4 Days – 8am – 6pm \nPre-Requisites: \n\nVeederTEC ATG Installer Class ID: 0000012987\n\n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nInstallation & Set-Up (probes\, sensors & transducers) for TLS 450+\, 450 and 350\nCSLD\nPLLD\nBIR\nAccuchart\nLaptop Communication\n\n  \nSkills Acquired: Installation & Set-Up (probes\, sensors & transducers)\, for TLS 450+\, 450 and 350\, CSLD\, PLLD\, BIR\, Accuchart\, Laptop Communication
URL:https://jfpetrogroup.com/course/veeder-root-atg-factory-certification-baton-rouge-5/
LOCATION:Baton Rouge\, LA\, 2410 Vail Dr\, Denham Springs\, LA\, 70726\, United States
CATEGORIES:Veeder Root
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/veeder-root.png
ORGANIZER;CN="Zach Cantrelle":MAILTO:zachary.cantrelle@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241021T080000
DTEND;TZID=America/Chicago:20241025T180000
DTSTAMP:20260525T070943
CREATED:20240426T142838Z
LAST-MODIFIED:20240426T142838Z
UID:10615-1729497600-1729879200@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - San Antonio
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nSafety\nApplause Media\nFlexPay Connect v2\nFlexPay IV\nDownloading from Extranet\nLaptop Tools & Communications\nDispenser Programming\nZ Modem Communications\nElectronic & Hydraulic Components & Troubleshooting.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-san-antonio-30/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2020/05/Encore_700_S_highres.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241021T080000
DTEND;TZID=America/Chicago:20241025T180000
DTSTAMP:20260525T070943
CREATED:20240529T161025Z
LAST-MODIFIED:20240618T212204Z
UID:10843-1729497600-1729879200@jfpetrogroup.com
SUMMARY:Gilbarco Passport Factory Certification - Raleigh
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\nPassport POS Pre-Course” (ID GLPSBUS20-PRE) (10-12 hours) with a\nscore of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nIntroduction to Passport & Hardware Overview\nSoftware Installation\nDispenser Hub Programming & Service\nSoftware Upgrades\nBasic Programming\nBasic Troubleshooting\nDatabase Extraction
URL:https://jfpetrogroup.com/course/gilbarco-passport-factory-certification-raleigh-11/
LOCATION:Raleigh\, NC\, 100 Perimeter Park Dr Ste H\, Morrisville\, NC\, 27560\, United States
CATEGORIES:Passport Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Passport-Side-NewGUI-ImpulsePIN-cropped-300x300-1.png
ORGANIZER;CN="Charles Beaver":MAILTO:cbeaver@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241021T080000
DTEND;TZID=America/Chicago:20241025T180000
DTSTAMP:20260525T070943
CREATED:20240723T135848Z
LAST-MODIFIED:20240723T140701Z
UID:11923-1729497600-1729879200@jfpetrogroup.com
SUMMARY:Truck Stop Training - Atlanta Internal Only
DESCRIPTION:Internal JFPG Truck Stop Training
URL:https://jfpetrogroup.com/course/truck-stop-training-atlanta-internal-only-10/
LOCATION:Atlanta\, GA\, 4070 Buford Highway Suite 7\, Duluth\, GA\, 30096\, United States
CATEGORIES:Truck Stop Training
ATTACH;FMTTYPE=image/jpeg:https://jfpetrogroup.com/wp-content/uploads/2021/07/JF-Way-Header-01-scaled.jpg
ORGANIZER;CN="John Damron":MAILTO:john.damron@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241028T080000
DTEND;TZID=America/Chicago:20241101T180000
DTSTAMP:20260525T070943
CREATED:20240426T143417Z
LAST-MODIFIED:20240426T143417Z
UID:10617-1730102400-1730484000@jfpetrogroup.com
SUMMARY:Verifone Commander Factory Certification – San Antonio
DESCRIPTION:Class Length \n5 Days – 8am – 6pm \nPre-Requisites: \nCommander: Site Controller VASC Pre-Course.\nNote: Pre-Course is ordered from premier.verifone.com. If no account\, email i_petrotraining@verifone.com \nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nCertification on Commander\, Ruby2 and Topaz\n• Installation\n• Service\n• Programming\n• Network specific to Commander
URL:https://jfpetrogroup.com/course/verifone-commander-factory-certification-san-antonio-32/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, 45414\, United States
CATEGORIES:Verifone Commander
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/commander.png
ORGANIZER;CN="Duane King":MAILTO:tlindburgh@jfpetrogroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241028T080000
DTEND;TZID=America/Chicago:20241101T180000
DTSTAMP:20260525T070943
CREATED:20240724T154846Z
LAST-MODIFIED:20240724T154846Z
UID:11987-1730102400-1730484000@jfpetrogroup.com
SUMMARY:Gilbarco Dispenser Factory Certification - Dayton
DESCRIPTION:Class Length \n5 Days: 8am – 6pm \nPre-Requisites: \n\nOnline Gilbarco API Certification Course Class ID: 00003196\n\nNote: The actual training material and course are offered by American Petroleum Industry. See Gilbarco Course Catalog CLICK HERE \n\n“Dispensing Systems Certification Pre-Course” (ID GLDSBUS40-PRE) with a score of 80% or better.\nNote: Pre-Course is ordered through the Gilbarco LMS – Saba. https://gilbarco.sabacloud.com No login\, select “Sign Up” to register.\n\nMaterial Required: \n\nLaptop with Windows 7 or higher (32 or 64 bit). Needs to have serial port or USB to serial port.\nSmall hand tools – pliers\, screwdrivers\, 3/8” socket set\, multimeter\, volt/ohm meter\, anti-static wrist strap (per person)\nLock-Out/Tag-Out Kit\nNote taking supplies (notebook\, pen\, pencils\, etc.)\n\nSkills Acquired: \n\nSafety\nApplause Media\nFlexPay Connect v2\nFlexPay IV\nDownloading from Extranet\nLaptop Tools & Communications\nDispenser Programming\nZ Modem Communications\nElectronic & Hydraulic Components & Troubleshooting.
URL:https://jfpetrogroup.com/course/gilbarco-dispenser-factory-certification-dayton-13/
LOCATION:Dayton\, OH\, 7476 Webster Street\, Dayton\, OH\, 45414\, United States
CATEGORIES:Dispensing Systems Training
ATTACH;FMTTYPE=image/png:https://jfpetrogroup.com/wp-content/uploads/2021/09/Encore_700_S_highres-300x300-1-e1767890948263.png
END:VEVENT
END:VCALENDAR